LC UPC 12-core tubed optical fiber pigtail

LC UPC 12-core tubed optical fiber pigtail is a 12-core optical fiber fusion splice with LC UPC connector, which is designed with sleeve protection.

LC UPC means that the connector type used in the optical fiber fusion splice is LC (Lucent Connector) non-inclined surface physical contact connector, which has a non-inclined surface design and is suitable for general application scenarios. UPC means that the end face of the connector is ultra-precision polished to reduce insertion loss and reflection loss, providing lower signal attenuation and higher transmission performance.

12-core tubed optical fiber pigtail means that the optical fiber fusion joint has 12 core optical fibers and sleeve protection. 12-core optical fiber means that there are 12 optical fiber cores inside the optical fiber fusion joint, which can transmit multiple optical signals at the same time. Sleeve protection covers the fiber core in a sleeve to provide additional protection and durability.

Sleeve protection provides additional protection, making the fiber optic core more durable during installation and use. Sleeves also help reduce the fiber’s bend radius, preventing fiber damage and signal attenuation.

In the data center, LC UPC 12-core tubed optical fiber pigtail can be used to connect servers, switches, routers and other equipment to achieve high-speed, high-capacity and high-efficiency data transmission. When using it, you need to pay attention to selecting the appropriate length and type of fiber optic jumper to avoid signal attenuation or interference caused by being too long or too short. Pay attention to keeping the fiber end face clean and perform regular cleaning and inspection to prevent dust or stains from affecting optical performance.

In optical fiber communications, LC UPC 12-core tubed optical fiber pigtail can be used to connect optical fiber terminal boxes, optical splitters, combiners and other equipment to achieve long-distance, large-capacity, and high-quality communication signal transmission. When using it, you need to pay attention to selecting fiber jumpers with appropriate wavelengths and modes to avoid signal loss or bit errors caused by mismatching the equipment or modules. It is necessary to observe safety regulations and avoid looking directly at or coming into contact with the laser beam to prevent damage to the eyes or skin.

In optical fiber sensing, LC UPC 12-core tubed optical fiber pigtail can be used to connect optical fiber sensors, controllers, displays and other equipment to achieve real-time monitoring and control of physical quantities such as temperature, pressure, vibration and so on. When using it, you need to pay attention to selecting fiber jumpers with appropriate sensitivity and precision to avoid measurement errors or control failures caused by mismatching the sensor or controller. You need to pay attention to protecting the fiber jumper to avoid fiber breakage or performance degradation caused by excessive bending or stretching.

In the optical fiber distributed antenna system, LC UPC 12-core tubed optical fiber pigtail can be used to connect base stations, remote units, antennas and other equipment to achieve effective coverage and expansion of wireless signals. When using it, you need to pay attention to selecting fiber jumpers with appropriate frequency and power to avoid signal attenuation or interference caused by mismatching the equipment or antenna. It is necessary to pay attention to arranging the fiber jumpers according to the planned route and location to avoid signal interference or loss caused by crossover or overlap.

LC UPC 12-core tubed optical fiber pigtail adopts LC interface, which is a miniaturized optical fiber connector that takes up little space, is easy to plug and unplug, and is suitable for high-density optical fiber wiring.

LC UPC 12-core tubed optical fiber pigtail uses UPC polishing method, which is a high-precision polishing process that can improve the flatness and optical performance of the fiber end face, reduce insertion loss and return loss, and improve signal stability and reliability.

LC UPC 12-core tubed optical fiber pigtail integrates 12 single-mode or multi-mode optical fibers. Each fiber has an independent number and color identification for easy identification and management. At the same time, each fiber has a protective sleeve to prevent the fiber from mechanical damage or environmental impact.

LC UPC 12-core tubed optical fiber pigtail has passed strict quality inspection and performance testing, complies with international standards and industry specifications, has good compatibility and interchangeability, and can be seamlessly connected with various devices and modules.